SafetyPass Pro Electronic Speed Governor Control System - Big-Rigs Only

Provides Maximum Rated RPM in Highest Gear of most 6-18 speed Manual Transmissions. Works with Electronically Controlled Cummins, Detroit, Caterpillar and Volvo Engines. Models Years: 1992 thru 2008 Class 6 thru 8 trucks only.

• Installation kit included. Fits most brands of trucks, including Freightliner, Kenworth, Peterbilt, Sterling, Western Star, Volvo and others with Weather-Pack or Metri-Pack connectors.

• 5 minute hook-up and removal using existing Vehicle Connectors.  Item XM6KT $249.95 + S/H - Shipping WT: 1.6 lbs.

Not recommended for  automatic transmissions, A Limited performance increase can be expected and possible error codes  may result.

Precautions: The SafetyPass Pro creates a safer driving environment for all hi-way users when used properly. We recommend this device only be used as a means to increase public safety by allowing the driver to operate their vehicle at a speed that offers the highest degree of safety determined by traffic flow conditions. Freeway capacities increase when trucks  "blend in" with the speed of the traffic rather than hindering and slowing traffic. This device should be used to create a safer operating environment for the truck-driver and the motoring public  who become very impatient with slow trucks on 2-lane highways and jeopardize their own lives and put others at risk when attempting to pass a "Rolling-Roadblock", truck that is too slow, Caused by a speed governor that is set TOO LOW. Close Calls and Dangerous passing times can be avoided or reduced, when this device is used properly. This is our intended goal for the SafetyPass Pro.      Any other use of this device is not recommended and strongly discouraged. User assumes all risk and liability for use of this product.

Country

Shipping Days

Shipping Charges  USD

USA

14.95

36.95

26.95

All orders ship within 24 hrs biz days via Priority Mail - 3 to 7 day delivery for most locations worldwide.

Warranty Details: 1 Yr. Repair or replacement Warranty. Includes a 30 day Money Back Guarantee if not totally satisfied. Just return it within 30 days of purchase in resalable condition and receive a prompt and courteous refund.

XM6IK - Standard Installation Kit - 11' Main Cable + 12" Metri-pack 150.2 Adapter Cable              (when purchased separately)

• Fits most brands of trucks, including Freightliner, Kenworth, Peterbilt, Sterling, Western Star, Volvo and others with Weather-Pack or Metri-Pack connectors.  

• Commercial Grade Factory Materials meet or Exceed OEM Specifications. Built for the severe extremes of over-the-road class 8 trucks.

• Item XM6IK $59.95 + S/H - Shipping WT: 0.9 lbs.

Order Additional Cables - Adapters and  Connectors Here

XM6MC - 11' (3.4m) Main Cable

Use this cable to interface control unit with vehicle connectors.

Plugs into existing vehicle connectors using  Weather-Pack connectors.

Standard RCA jacks Connect to Control Unit located inside cab.

Fits most brands of trucks, including Freightliner, Kenworth, Peterbilt, Sterling, Western Star, Volvo and others with Weather-Pack connectors.

Item XM6MC $34.95 + S/H - Shipping WT: 0.7 lbs.

XM6EC6 - Extension Cable for Cab-Over Tractors - For use with Main Cable (XM6MC)

• Extra 6 feet of Length for the Main Cable.

• Required for Installation on Cab-over Tractors. Freightliner Argosy etc.

• Extends main cable length to 17 feet (5.2m).

• Fits all adapter cables

• Sheathed in wire loom to match main cable.

Item XM6EC6 $24.95+S/H - Shipping WT: 0.6 lbs.

XM6AC - Metri-Pack Adapter Cables

• For use with Main Cable (XM6MC).

• Plugs into vehicle speed sensor/ECM leads using Metri-Pack connectors.

• For use on most newer trucks built after 2001.

Item XM6AC $29.95+S/H - Shipping WT: 0.5 lbs.

NEW! 

XM6MP280 - Metri-Pack 280 Adapter Cables

• For use with Main Cable (XM6MC).

• Plugs into vehicle speed sensor/ECM leads using Metri-Pack 280 connectors.

Item XM6MP280 $29.95+S/H Shipping WT: 0.5 lbs.

XM6DT - 6" (.15m) Deutsch Adapter Cables

• For use with Main Cable (XM6MC).

• Some International or Navistar Trucks use this speed sensor connector.

• Connects to  Main Cable

• Plugs into vehicle speed sensor leads

Item XM6DT $29.95+S/H - Shipping WT: 0.5 lbs.

• For use with Main Cable (XM6MC).

• 1 Weather-Pack Tower and 2 Weather-Pack shrouds for simultaneous connection to the ECM and Speedometer.

• Keeps mileage in-sinc on the ECM as well as the odometer.

• Enables visual feedback using speedometer to determine device speed.

• Makes Calibration a snap.

• Item XM6WY   $34.95 + S/H - Shipping WT: 0.5 lbs.

NEW! XM6MY - Metri-Pack Y Adapter for 2 speed sensors or 2 leads

• For use with Main Cable (XM6MC).

• 1 Weather-Pack Tower and 2 Metri-Pack shrouds for simultaneous connection to the ECM and Speedometer.

• Keeps mileage in-sinc on the ECM well as the odometer.

• Enables visual feedback using speedometer to determine device speed.

• Makes Calibration a snap.                    

•  Item XM6MY   $34.95 + S/H - Shipping WT: 0.5 lbs.

• If you have a compatible engine and transmission but the wrong connectors just Splice in a set of Weather-Pack Pigtails.

• Fits Main Cable

Item XM6WP $4.95+S/H Shipping WT: 0.4 lbs.

XM6WC - Weather-Pack Connectors

• 1-set - Includes 1 Tower, 1 Shroud, 3 Male/Female Pins each and 4 cable seals.

• Weather Tight connectors.

Item XM6WC $4.95 + S/H       Shipping WT: 0.4 lbs.

• Fast Shipping
• Great Customer Service
• Excellent Tech Support
• Satisfaction Guaranteed